PRODUCTS




Connector Systems
Contour Electronics is a franchised distributor for the ODU connector range.
Tired of being pushed & pulled around by your supplier? Our overmolded cable assemblies can improve conventional interconnects by increasing the flex life & pull strength of these assemblies. The company through its design guide is a true, value added partner. Contour is able to hold buffer stocks solely for you to call off inline with your production needs, therefore reducing lead times.
- 5 series
- 8 sizes
- IP 50 and IP 68
- High number of mating cycles
- Positive latch (open or closed)
- Blind mating
- Custom options possible

ODU MAC
Modular Attachable Cable
- Alu-Frame or DIN housing
- Signal-, Power-, High-Voltage, COAX-, Fibre optic contacts; pneumatic modules
- High contact density

ODU Mini-Snap
Cylindrical Connector
- Circular connector made out of metal
- 5 Series
- 5 Sizes
- 1-40 positions, Special inserts

ODU Mini-Snap PC
Cylindrical Connector
- Circular connector made out of plastic
- 3 Sizes
- IP 50 and IP 68
- 2-27 positions, Special inserts

ODU Medi-Snap
Cylindrical Connector - Especially fot the medical industry
- Circular connector made out of plastic
- 1 Size
- 1-14 positions, Special inserts

ODU Single Contacts
- Springwire contacts
- Lamella Contacts
- Slottet Socket
- dia 0.6-50 mm, up to 2,000 A

ODU Mini-Flakafix
Card-to-Cable Connector
- Grid 1.27 x 2.54 mm
- 10/20/30/40/50 ways
- SMT- and Solder-In Technology
- Locking with plastic lever or metal clip

ODU Flakafix
Card-to-Cable Connector
- Grid 2.54 x 2.54 mm
- 10-64 ways
- SMT-, Pin-inPaste-, Press-In- and Solder-In Technology

ODU Heavy Duty Connectors
- Up to 1,500 A
- Up to 252 ways
Harness Capabilities
We have significant expertise in the manufacture and supply of "discrete wire" cable harnessing. In particular, we supply assemblies to the "Electric Motor and control system" markets. - For example:- Electric vehicles, Stair lifts, Consumer goods, Power Supplies etc.
From our Far Eastern manufacturing base we can supply globally, low medium and high volumes at very competitive pricing. We also service all types of purchasing systems as used in high volume manufacturing. eg. Kan Ban, JIT, VMI etc.
Cable Assembly
- Moulded cables (incorporating all standard styles of connectors)
- IDC Ribbon Cables
- USB, 1.0, 1.1, 2.0, OTG
- HDMI
- IEEE1394 (Firewire), 1394 - 1995, 1394a - 2000, 1394b
- RF / Coaxial
- Integrated PCB / Cable Assemblies. Applications where customers require PCB’s to be within the overmould of a connector system
PCB
Our printed circuit assembly service can offer an all encompassing solution from the design of the printed circuit board to manufacture and ‘Box Build’ if required. Our facilities allow us to offer Surface Mount (SMT) construction of printed circuit boards or hand build of conventional through hole circuit boards, flow solder capability and auto insertion.
PCB CABLE ASSEMBLIES
The integration of PCBA into cable forms is a key strength of Contour; we have extensive experience of overmoulding PCBA into or part of a cable form or dongle ensuring a reliable, secure, visually pleasing & cost effective solution. Solutions can be designed to incorporate logos and other features, and can complement the system that they are to be used within by matching colours.
Connectors
- Board to Board, 0.5mm - 0.8mm - 1.27mm - 2.00mm - 2.54mm, straight, right angle and SMT
- Extended pin headers and custom headers
- FPC, 0.8mm / 1.00mm / 1.25mm
- DC Jacks
- Phono Jacks
- Mini - Din
- D - Subminiature
- USB, 1.0, 1.1, 2.0, OTG
- HDMI
- IEEE1394 (Firewire), 1394 - 1995, 1394a - 2000, 1394b
- CF (Compact Flash)
- Smart Media
Modular Jacks
- An extensive range of unshielded and shielded connector styles
- LED Jacks
- Mag Jacks
RF / Coaxial connectors

SMA
Description
SMA, 50 ohm-sub miniature coaxial connector with screw type coupling mechanism. Frequency range: DG-12.4 GHz.
Application
Dividers, mixers, amplifiers, trimmers and attenuators.

TNC
Description
TNC connector with screw type coupling mechanism. Frequency range: DC-11GHz (50 ohm).
Application
Radio telecommunication, cellular base stations.

SMB
Description
SMB, 50 ohm-sub miniature coaxial connector with snap-on coupling mechanism. Frequency range: DC-4 GHz.
Application
Telecommunication, test equipment and instrumentation

UHF
Description
UHF, general purpose, non-constant impedance. For use in low voltage applications. Frequency range: DC-500 MHz.
Application
CCTV, civil defence, landing systems, ground control apparatus, ship to shore communications and mobile radio equipment hook-ups between antenna and transmitter or receiver.

MCX
Description
MCX connector with snap-on coupling mechanism. Available in 50 ohm. Frequency range: DC-6 GHz.
Application
GPS, wireless communication and automotive.

Mini-UHF
Description
Mini-UHF, general purpose, non-constant impedance. For use in low-voltage applications. Frequency range: DG-500 MHz
Application
Small size and lightweight at a relatively inexpensive cost for many coaxial connector applications.

MMCX
Description
MMCX connector with snap-on coupling mechanism. Available in 50 ohm. Frequency range: DC-6 GHz.
Application
Handheld wireless devices, PCMCIA cards, telecom equipment.

F
Description
Screw type coupling
Application
CATV, TV, ANTENNA and other similar applications.

BNC
Description
BNC connector with bayonet coupling mechanism. Frequency range: DC-4 GHz (50 ohm) and 1GHz (75 ohm), respectively.
Application
Used with a wide range of systems, including Radio Telecommunication Systems, Medical Equipment, Computer Network, Test Instrumentation and other similar applications

FME
Description
The FME series of connectors vary in type from "rotating nipple antenna" to straight plug crimp type. Performance from DG-900MHz.
Application
GPS, mobile and WLAN sectors of the communications industry.

N
Description
Type N connector with screw type coupling mechanism. Frequency range DG-11GHz (50 ohm)
Application
They are most suitable for use in laboratory tests, satellite TV, MATV and other sophisticated electronic applications <11 GHz

TWINAX
Description
TWINAX are twin contact connectors utilized with 75, 93 and 100 ohm twin conductor cables.
Application
Data processing equipment, LAN systems and balanced line high sensitivity circuits for data.
Waterproof (IP67) connector systems
- 9 pin plastic D connector system
- 10 pin plastic connector system
- Circular connector system
Coaxial Cable
- A wide range of coaxial cable is available, including type 100 satellite cable that is RNE678/100 approved.
Fibre Optics
- Patch Cords
- POF (Plastic Optical Fibre), PN-PN, F07-F07, Mini Plug - Mini Plug, Toslink - Toslink, Opilink2.5mm / 3.5mm / 3.6mm, Mini Plug - Toslink
- GOF (Glass Optical Fibre), SC-SC, MTRJ-MTRJ, LC-LC, ST-ST, FC-FC, and Hybrid cords



